Skip to main content
All CollectionsAdvanced Functionality
Remote Access & Firewalls
Remote Access & Firewalls
Angel Horowitz avatar
Written by Angel Horowitz
Updated over a week ago

Depending on the level of security in the Windows Firewall and any other anti-virus firewalls running on your server computer, you may need to make some exceptions if you cannot connect with Remote Access. These instructions detail the specific rules to enable for Remote Access to work properly.
โ€‹
If you receive a message form the software that Remote Access or your software cannot detect an Internet connection:

  1. Check your Internet connection. If your Internet connection really is not working, Remote Access cannot be used. If you have verified that it's functioning properly and continue to receive the error message, then you will need to make exceptions in your Windows Firewall.

  2. Go to Control Panel > System & Security > Windows Firewall.

  3. Select Advanced Settings on the left.

  4. The Windows Firewall with Advanced Security window will open.

  5. Click on Inbound Rules in the upper left.

  6. Scroll through the list and find File and Printer Sharing (Echo Request - ICMPv4-In).

  7. You may see this entry listed multiple times. Right-click on each one and select Enable Rule.

  8. Click on Outbound Rules in the upper left.

  9. Repeat Steps 6 & 7.

  10. These may be the only enabled rules needed to get Remote Access working. Go back into your software and attempt to connect with Remote Access again. If the connection fails again, continue to Step 11.

  11. Select New Rule... in the Actions pane on the right.

  12. Select the Port radio bubble and click Next.

  13. Select the TCP and Specific local ports radio bubbles, enter 8080-8085 into the box, and click Next.

  14. Select the Allow the connection radio bubble and click Next.

  15. Apply the rule to all three network types by checking each box and click Next.

  16. Name the rule 'Remote Access TCP' and click Finish.

  17. Click on Inbound Rules in the upper left.

  18. Repeat Steps 11-16.

  19. Go back to your software and attempt to connect with Remote Access again. If these extra rules still do not fix your firewall issue, make sure to check any anti-virus software and make exceptions there as well. Refer to vendor specific literature or a local network technician for assistance making the proper exceptions.

Did this answer your question?